Genuine BMW 2.38 mm Valve Adjustment Shim – 11348563627

The Genuine BMW 2.38 mm Valve Adjustment Shim – 11348563627 is a precision component intended for valve clearance adjustment on compatible BMW Motorrad engines using a calibrated shim system.

This specific part has a nominal thickness of 2.38 mm and should be selected according to the measurements obtained during valve clearance inspection.

Genuine BMW 2.38 mm valve shim

Correct valve clearance adjustment requires the existing valve clearance to be measured before determining the required shim thickness.

This specific part corresponds to:

Thickness: 2.38 mm
BMW part number: 11348563627

Shim thickness should not be selected solely according to motorcycle model. The required size depends on the individual clearance measured at each valve and the calculation performed during the adjustment procedure.

For BMW Motorrad valve clearance adjustment

During engine timing and valve-train maintenance, the valve clearances are checked to determine which shims can remain installed and which require replacement with a different thickness.

Part number 11348563627 provides a calibrated 2.38 mm shim when this is the thickness required according to the measurement and applicable service procedure.

Suitable applications include:

• BMW Motorrad valve adjustment.
• Valve clearance setting.
• Replacement of calibrated valve shims.
• Engine timing maintenance.
• Compatible valve-train repairs.
• Professional BMW Motorrad engine servicing.

Contents

• 1 x Genuine BMW Valve Adjustment Shim – 2.38 mm – 11348563627.

Quantity: 1 unit.
Nominal thickness: 2.38 mm.

Main features

• Genuine BMW replacement part.
• Calibrated valve adjustment shim.
• Part number 11348563627.
• Nominal thickness: 2.38 mm.
• For precise valve clearance adjustment.
• Precision component for compatible engines.
• Supplied as 1 individual shim.
• Suitable for engine timing and valve-train maintenance.
• For compatible BMW Motorrad applications.

Related models

Compatible with BMW Motorrad engines using part number 11348563627 and this type of calibrated valve adjustment shim.

Part compatibility and, especially, the requirement for a 2.38 mm shim, must be determined through the applicable valve clearance measurement and adjustment procedure.

Related applications

• BMW valve adjustment shim.
• Genuine BMW valve shim.
• BMW 2.38 mm valve shim.
• BMW 2.38mm shim.
• BMW Motorrad valve adjustment.
• BMW valve clearance adjustment.
• BMW calibrated valve shim.
• BMW engine valve shim.
• BMW replacement valve shim.
• BMW 11348563627.
• Genuine BMW shim 11348563627.

Important: valve clearance must be measured and the required shim thickness calculated according to the engine specifications before ordering. An engine using this type of shim does not necessarily require the 2.38 mm size.

If you have any questions, please contact us at Contact - nOficial